Clutch bearing
Product information
INTRODUCTION
Dimensions and Capacities
|
Model |
Torque |
Max.Overrunning |
Drag |
Bore Size |
Keyway |
A |
B |
C |
D |
E |
F |
Weight |
|
|
Inner Race |
Outer Race |
||||||||||||
|
(N·m) |
(r/min) |
(r/min) |
(N·m) |
(H7) |
|
|
|
|
|
|
|
(g) |
|
|
TSS 8 |
6.7 |
6000 |
3000 |
0.005 |
8 |
2x1.0 |
8 |
24 |
22.2 |
11.4 |
0.6 |
0.6 |
14 |
|
TSS10 |
12 |
4500 |
2300 |
0.007 |
10 |
3x1.4 |
9 |
30 |
27 |
15.6 |
0.6 |
0.6 |
27 |
|
TSS12 |
17 |
4000 |
2000 |
0.009 |
12 |
4x1.8 |
10 |
32 |
29.5 |
18 |
0.6 |
0.6 |
31 |
|
TSS15 |
22 |
3500 |
1800 |
0.01 |
15 |
5x1.2 |
11 |
35 |
32 |
20.6 |
0.6 |
0.6 |
39 |
|
TSS20 |
41 |
2600 |
1300 |
0.01 |
20 |
6x1.6 |
14 |
47 |
40 |
26.7 |
0.8 |
0.8 |
115 |
|
TSS25 |
56 |
2200 |
1100 |
0.02 |
25 |
8x2.0 |
15 |
52 |
45 |
32 |
0.8 |
0.8 |
140 |
|
TSS30 |
105 |
1800 |
900 |
0.03 |
30 |
8x2.0 |
16 |
62 |
55 |
40 |
0.8 |
1.0 |
215 |
|
TSS35 |
136 |
1600 |
800 |
0.03 |
35 |
10x2.4 |
17 |
72 |
63 |
45 |
0.8 |
1.0 |
300 |
|
TSS40 |
296 |
1400 |
700 |
0.18 |
40 |
12x2.2 |
18 |
80 |
72 |
50 |
0.8 |
1.0 |
425 |
|
TSS45 |
347 |
1300 |
650 |
0.21 |
45 |
14x2.1 |
19 |
85 |
75.5 |
57 |
1.2 |
1.0 |
495 |
|
TSS50 |
403 |
1200 |
600 |
0.22 |
50 |
14x2.1 |
20 |
90 |
82 |
62 |
1.2 |
1.0 |
545 |
|
TSS60 |
649 |
910 |
460 |
0.33 |
60 |
18x2.3 |
22 |
110 |
100 |
80 |
1.2 |
1.5 |
950 |
Installation and Usage
1. The TSS Series Cam Clutch is designed for press fit installation.
Correct interference dimensions must be maintained to obtain maximum clutch performance.
The internal diameter of the housing should meet the H7 tolerance. Refer to item 8 in the installation and
usage of BB Series Cam Clutch for information on the installation method.
2. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation
of the clutch.
3. When installing the clutch, mount it with a type 62 bearing to avoid radial force, since this clutch does not have
any bearing support.
4. Confirm the direction of rotation before installation.
5. The recommended shaft tolerance is h7, and the key profile should be in accordance with the following
standard.
TSS 8 ~ 12······DIN 6885. 1
TSS 15 ~ 60······DIN 6885. 3
6. Suitable surface pressure of the key should be selected
according to your company design standards.
Lubrication
1. Oil lubrication is recommended.
2. Do not use greases or lubricants with EP additives.
1. The TSS Series Cam Clutch is designed for press fit installation.
Correct interference dimensions must be maintained to obtain maximum clutch performance.
The internal diameter of the housing should meet the H7 tolerance. Refer to item 8 in the installation and
usage of BB Series Cam Clutch for information on the installation method.
2. Make sure the housing has enough strength to withstand the pressure required for the press fitting installation
of the clutch.
3. When installing the clutch, mount it with a type 62 bearing to avoid radial force, since this clutch does not have
any bearing support.
4. Confirm the direction of rotation before installation.
5. The recommended shaft tolerance is h7, and the key profile should be in accordance with the following
standard.
TSS 8 ~ 12······DIN 6885. 1
TSS 15 ~ 60······DIN 6885. 3
6. Suitable surface pressure of the key should be selected
according to your company design standards.
Lubrication
1. Oil lubrication is recommended.
2. Do not use greases or lubricants with EP additives.
SUPPORT CONSULTANCY
Linqing zhuochi bearing factory
Contact person：Manager Cao
Cell phone：0832526895
Telephone：0832526895
